Home | ER-101 | ER-102 | ER-301 | Wiki | Contact
Topic Replies Activity
Do you screw all of your modules in?

Well if you don’t screw them in and this happens while your case is powered on: [falling-between-the-rails] then with high probability you have either destroyed the module or damaged it in such a way that it will fail …

49 April 5, 2020
Split step duration issue 2 April 6, 2020
Share your ER-301 Music 739 April 6, 2020
Middle Layer SDK (aka patching with Lua) 314 April 5, 2020
Fat Comp & Ez Comp custom unit (donationware) 19 April 5, 2020
Some new Units to share 353 April 5, 2020
Er-301 black and gold panels complete 15 April 5, 2020
Tuner unit? 45 April 5, 2020
How to save pin sets within a custom instrument? 9 April 5, 2020
I2C setup with 16n Faderbank 235 April 5, 2020
Recording loops and copying the audio to a grain stretch? 6 April 4, 2020
ER-301 Micro systems 473 April 4, 2020
Synthesis and Sound Design Techniques 63 April 3, 2020
Noise Gate 5 April 3, 2020
Monome Crow and ER-301 57 April 2, 2020
Dub looper to manual grains questions 3 April 1, 2020
301 + Max/MSP (Gen~) 17 April 1, 2020
Unofficial Getting Started Videos 309 April 1, 2020
Just starting with the ER-301? Ask Your Questions Here! 144 April 1, 2020
Tricycle - a three band looper custom unit 9 March 1, 2020
Buchla Music Easel Inspired Custom Units 27 March 31, 2020
No pinned controls - what does this mean? I can't set up any signal chains or access anything in user mode 6 March 31, 2020
Porting Madrona Labs' Reverb to 301? 16 March 30, 2020
Moving start and end points of a splice 15 March 29, 2020
Total duration display when copying across patterns 5 March 28, 2020
Matte black panel 45 March 28, 2020
ER-301 as a mastering chain? 4 March 27, 2020
Alternate black panel for the ER-301 354 March 27, 2020
ER-101/102 loop points not working 12 March 27, 2020
6 track recorder help 12 March 26, 2020