Changing the 101/102 reset behaviour

In the docs for the 101 it states the following:

"reset can be either immediate or quantized to coincide to with the ending of the current track, pattern, or step "

How do you set this with the 101/102 combo?
I am having some reset issues and thought this might have something to do with it… :slight_smile:

Is this what you are experiencing:

gwpt, I couldn’t find that exact quote in the ER-101 manual for firmware v2.06. I didn’t look in previous manuals.

At any rate, the following is from the “RESET input and button” section on page 5:
“You can also quantize (in time) a reset by holding the TRACK, PATTERN, or STEP focus button while pressing the RESET button. This will cause the actual RESET to coincide with the next time the cur- rent TRACK, PATTERN, or STEP ends, respectively.”

Hi Vcoadsr, I don’t think so, i’m pretty sure the actual issue is my clock source which is skipping a clock when I reset it (which explains why the 101 is late). So nothing to do with the 101!

HI zengomi, argh thanks. I missed that. :slight_smile: :slight_smile:

1 Like