Doepfer psu2 + er101

Hello

Sorry about this I read the manual and just Incase where do I need to put it on :slight_smile: in the back usb/reg/bus

I don’t have 5 volt adapter

+5V source.)

  • If +5V source is internal REGulator then approx 120mA from +12V.
  • If +5V source is the BUS then approx 95mA from +5V and 25mA from +12V

Thank you for your help

You want to set it to REG, such that the internal regulator of the module derives a 5V source for the module from the 12V rail of the power supply. Thus, you don’t need your power supply to directly provide a 5V source.

3 Likes

Cool Thank you for your help :slight_smile: