Home | ER-101 | ER-102 | ER-301 | Wiki | Contact

ER-101 Table Switch detached

support

#1

Hi all. Sadly the Table switch is no longer attached to the ER-101. I can’t tell how the switch was originally designed to fasten to the ball socket and if it’s repairable. Otherwise I suspect I would need to order a few parts from Mouser and carefully replace the broken parts. Any input would be great. I emailed Brian and waiting to hear back but thought I would check on the Forum in the meantime.

Thanks,
Mark


#2

Hello Mark.

The entire switch needs replacing. If you have soldering (and desoldering) experience then it is not a difficult task to do yourself.

Here is the part number:

ate-long
ATE1E-2F3-10-Z
digikey link

There is also a version with a shorter paddle if you prefer that:
ate-short
ATE1E-2M3-10-Z
digikey link

You are of course welcome to send it to me instead.


#3

Thank you, Brian. Part ordered.