I have a question about CPU load, as i’m building a live set almost only on the ER301, i hope is okay to write in this topic:
It’s normal that the CPU doesn’t go down till 3% when i bypass all the mixers/units, but remains in a range that goes high proportionally to the number of the mixers/units loaded?
Let’s say if i have 4 mixer with respectively few audio units inside everyone (singlecycle/variablespeed player/fm oscillators) and 4 delays for each unit the CPU% is near 65%, when i bypass every single thing in the chain the CPU% drops down till 12% and not to 3% , and if i add more mixers/units, more or less with the same amount of CPU% of the first four (after bypassing the others of course), if bypass everything in the module after that, the CPU% drops down to 28% and no more to 12%, and so on…
In a few words, more units i put inside, more the CPU remains up even with everything bypassed.
It’s a normal behaviour?
Of course if i delete the units the cpu drops to 3%, so maybe it’s normal that even with all bypassed the % doesn’t go down.