Home | ER-101 | ER-102 | ER-301 | Wiki | Contact

Top Display on ER-301

Hello everyone!

I just bought the ER-301. The module was sent from holland to italy (with postNL) and arrived in good condition except for a small problem. The upper display cover (the yellow one) which was slightly off-axis. I disassembled the panel following the instructions on wiki using the 12mm socket wrench. I repositioned the display cover on the panel rabbet but still seems to have a small movement when you touch it with your fingers. is small thing (of course), but I ask because the smaller display cover seems to be perfectly solid while the larger on top seems not to be. Is it possible that I have to tighten a few lives more appropriately?

Thanks in advance

Wouldn’t worry, mine is exactly the same! :slight_smile:

1 Like

Thanks, I thought it was just my problem:)